Kontakt
Kako nakupovati
Dostava
Svetovalec pri nakupu
Characterizing Defects In Metals Using PALS
Characterizing Defects in Steel, Aluminum and Copper by way of Positron Annihilation Lifetime Spectroscopy
Angleščina
108 b
Do 30 dni za vračilo
Drugi so kupili tudi
/
Mehka
82.10
€
Machines with moving parts develop wear and tear after some time of operation. Sometimes defects are on the surface, and thus are visible with the naked eye or with a microscope. However, some defects are seated below the surface and are unnoticeable by the human eye or by a microscope. One way of probing materials for these defects is by way of Positron Annihilation Lifetime Spectroscopy (PALS). This sensitive technique was applied to characterize atomic-scale defects in aluminum and copper samples, as well as steel bearing raceways of different levels of usage. Measurements on aluminum and copper were performed before and after annealing near the melting point. Results show that average positron lifetime decreases significantly after annealing. Then steel bearing raceways were subjected to PALS measurements before and after mechanical testing. Results show an average increase in the positron lifetime of tested bearings as compared to the as-fabricated bearing.
O knjigi
Angleščina
Podarite to knjigo še danes
To je povsem preprosto
1 Dodajte knjigo v košarico in izberite dostavo kot darilo 2 V zameno vam bomo poslali kupon 3 Knjiga bo dostavljena na naslov obdarovancaMorda bi vas zanimalo tudi
/
Mehka
12.22
€
/
Trda
174.92
€
/
Mehka
9.19
€
Pozdravljeni! Sem Libroamiko, vaš knjižni svetovalec.
Kako vam lahko pomagam?