Kontakt
Kako nakupovati
Dostava
Svetovalec pri nakupu
Boundary Layer Control Using Micro-Electromechanical Systems
Angleščina
129 b
Do 30 dni za vračilo
Drugi so kupili tudi
/
Mehka
30.20
€
This study investigated the use of MEMS devices to control the boundary layer separation from a circular cylinder in cross flow. Measurements were accomplished in AFIT's low-speed, 12-inch cross section wind tunnel. Velocity curves integrated for the momentum thickness were the primary means of detecting changes in the flow field. MEMS placed spanwise across the length of the cylinder were actuated in a variety of operating frequencies and at a variety of angular positions relative to the incoming flow. It was the goal to determine which combination of angle and frequency would best serve the purpose of boundary layer control. An optimal angle of 69 degrees was discovered, and the optimal frequency equal to that of the shedding frequency provided the best solution. Of the tests conducted, these conditions allowed nearly a 25% reduction of momentum loss in the cylinder wake.
O knjigi
Angleščina
Kategorije
Podarite to knjigo še danes
To je povsem preprosto
1 Dodajte knjigo v košarico in izberite dostavo kot darilo 2 V zameno vam bomo poslali kupon 3 Knjiga bo dostavljena na naslov obdarovancaMorda bi vas zanimalo tudi
/
Mehka
24.94
€
/
Mehka
24.64
€
/
Mehka
11.71
€
Pozdravljeni! Sem Libroamiko, vaš knjižni svetovalec.
Kako vam lahko pomagam?