Kontakt
Kako nakupovati
Dostava
Svetovalec pri nakupu
Biped robot designing and interfacing
Angleščina
100 b
Do 30 dni za vračilo
Drugi so kupili tudi
/
Mehka
75.18
€
The designing of a biped robot is the most challenging because of the inherent stability. However a walking robot has advantages over the wheeled robots. Although wheeled robots are commonly used, they only have limited ability to move to any destination. They suffer from the difficulties when travelling over uneven and rough terrains. In this work an attempt has been made to develop a prototype below hip a legged robot. The robot has 8 degree of freedom (DoF) in total that allow imitation of various human gaits. The conceptual design of the biped is done using SolidWorks and the simulation is done by using M.Sc ADAM The prototype design is initially developed in SolidWorks. The bipedal motion is simulated using M.Sc ADAMS software for mechanical system simulation. Aluminum is used for the fabrication. The robot uses 8 servo motors for actuating the various joints of the biped. The total weight of the biped is 1.15 kg and the motors are capable of delivering 1.6 Nm torque. The biped is interfaced with the controller available with Robix Rascal kit and by using the RobixR software to move the biped.
O knjigi
Angleščina
Podarite to knjigo še danes
To je povsem preprosto
1 Dodajte knjigo v košarico in izberite dostavo kot darilo 2 V zameno vam bomo poslali kupon 3 Knjiga bo dostavljena na naslov obdarovancaMorda bi vas zanimalo tudi
/
Mehka
8.97
€
Pozdravljeni! Sem Libroamiko, vaš knjižni svetovalec.
Kako vam lahko pomagam?